PCL CS-150 CNC Circular Cold Saw
The PCL CS-150 is a CNC circular cold saw that cuts solid bar from Ø50–150 mm with a TCT Ø460 × 2.6 mm carbide-tipped (TCT) blade. Bars load from a 6 m hydraulic rack and feed by servo and ball screw, and each piece is cut to ±0.1 mm with a narrow kerf, then sorted automatically.
- Ø50–150round bar, mm
- ±0.1 mmlength accuracy
- 2.6 mmkerf
- 18.5 kWcutting motor
Price on request. Send your material and bar size and we quote the standard configuration with freight to your port.
CS-150 specifications
Swipe the table sideways to see all columns.
| Parameter | CS-150 |
|---|---|
| Round bar | Ø50–150 mm |
| Square / rectangle | 55–130 mm |
| Blade | TCT Ø460 × 2.6 mm (TCT) |
| Kerf | 2.6 mm |
| Length accuracy | ±0.1 mm |
| Feed per stroke | 4–700 mm |
| Blade speed | 60–100 rpm |
| Cutting motor | 18.5 kW |
| Total power | 26 kW |
| Loading | 6 m hydraulic lifting rack, servo and ball-screw feeding |
| Machine weight | 4,200 kg |
| Price (EXW, standard configuration) | Ask for price |
Specifications for the standard configuration; options can change motor, weight and price.
Standard and optional equipment
Standard
- 6 m hydraulic lifting loading rack
- Servo and ball-screw feeding on linear guides
- Micro-lubrication of the blade
- Pneumatic sorting of heads and tails
- Chip conveyor
Options
- Spare TCT blades
- Blade re-sharpening guidance
- Longer loading rack
Compare with the models next to it
Swipe the table sideways to see all columns.
| Model | Round bar (mm) | Blade | Cutting motor (kW) | Price |
|---|---|---|---|---|
| PCL CS-120 | 10–120 | TCT Ø380 × 2.6 | 15 | Ask for price |
| PCL CS-150 | 50–150 | TCT Ø460 × 2.6 | 18.5 | Ask for price |
| PCL CS-180 | 80–180 | TCT Ø520 × 2.7 | 22 | Ask for price |
Prices are indicative EXW ranges in USD for the standard configuration. Options, voltage, packing and freight are quoted separately.
Typical uses
- Forging blanks
- Automotive and motorcycle parts
- Bearing rings and hydraulic fittings
- Fasteners and turned parts from bar
Before you order
Check three things: the largest section you cut (with some margin for the vise), the material grade and hardness, and how many cuts you need per shift. Tell us your voltage and frequency (for example 380 V 50 Hz or 440 V 60 Hz) so the motors and control are built for your grid. For blade choice, see our band saw blade TPI guide and the band saw vs cold saw comparison.
Get a price for the CS-150
Send the material, the largest section and the cuts you need per shift. We confirm the configuration and quote delivered to your port.
Frequently asked questions
How fast is the CS-150?
As a guide for the standard configuration, about 2 cuts per minute in Ø150 mm bar. Actual time depends on the steel grade.
What bar sizes does the CS-150 cut?
Round bar Ø50–150 mm and square or rectangular bar 55–130 mm.
How much material is lost per cut?
The kerf equals the blade thickness, 2.6 mm, plus a bar-end remnant left at the end of each bar.
Can it run unattended?
Yes. It loads from the rack, feeds, cuts and sorts on its own; the operator refills the rack.
Should I choose a band saw instead?
For a few cuts a day, a band saw costs less. For hundreds or thousands of pieces, the cold saw's speed and accuracy usually pay back the higher price.
Related machines
Last updated 15 October 2026. Specifications are for standard configurations and can change with options; confirm on your quotation.