P1325 CNC Plasma Cutting Machine
The P1325 is a compact CNC plasma table with a 1300 × 2500 mm working area, sized for standard 4 × 8 ft sheet. With a 45–120 A plasma source it cuts 0.5 to 25 mm carbon steel, stainless steel, aluminum and galvanized sheet at up to 15,000 mm/min, and repositions to ±0.03 mm. Automatic torch height control is standard.
- 1300 × 2500working area, mm
- 0.5–25 mmcutting thickness
- ±0.03 mmrepositioning
- 15 m/minmax travel speed
Specifications
Swipe the table sideways to see all columns.
| Parameter | P1325 |
|---|---|
| Working area (X × Y) | 1300 × 2500 mm (4 × 8 ft) |
| Z-axis travel | 150–200 mm |
| Cutting thickness | 0.5–25 mm, depending on the plasma source |
| Plasma source | 45–120 A |
| Max travel speed | 0–15,000 mm/min |
| Repositioning accuracy | ±0.03 mm |
| Control system | Starfire, Fangling or DSP |
| Drive | Precision stepper or servo motors |
| Transmission | Helical rack and pinion, square linear guide rails |
| Torch height control | Automatic (arc voltage), standard |
| Input voltage | 3-phase 380 V; 220 V optional |
| Nesting software | FastCAM or StarCAM |
| Fume control | Water table or exhaust system, optional |
Final values depend on the plasma source and options and are confirmed on your quotation.
How the P1325 is built
One-piece welded frame
The bed is welded in one piece and stress-relieved by high-temperature vibration aging, so it stays flat and square after years of thermal cycling.
Linear guides and helical rack
Square linear guide rails and helical rack-and-pinion drive give smooth motion at speed and hold a consistent kerf across the whole sheet.
Torch height control
The THC reads arc voltage and raises or lowers the torch in real time, so warped sheet does not cause bevelled edges or torch crashes.
Choice of control
Starfire and Fangling controls are common in plasma shops worldwide, which makes training and spare parts easy to find. DSP handheld control suits the simplest jobs.
Stepper or servo
Stepper drives keep the price down for thin sheet and signage. Servo drives hold accuracy at high speed and suit full shifts of production work.
Nesting software
FastCAM or StarCAM nests parts on the sheet automatically, which typically cuts plate waste by up to 20% compared with manual layouts.
Choose the plasma source by thickness
The P1325 accepts sources from 45 A to 120 A. Pick the current by the thickest plate you cut every day, not the thickest plate you might cut once a year.
Swipe the table sideways to see all columns.
| Plasma current | Good-quality cut (edge start) | Production pierce | Typical work |
|---|---|---|---|
| 45 A | up to 10–12 mm | about 6 mm | Thin sheet, signage, HVAC |
| 63–65 A | up to 16–20 mm | about 10 mm | General sheet metal |
| 85 A | up to 20–25 mm | about 12–16 mm | Brackets, base plates |
| 100–105 A | up to 25–32 mm | about 16–20 mm | Fabrication shops |
| 120–125 A | up to 32–38 mm | about 20–25 mm | Thicker structural plate |
Typical guidance for mild steel. Stainless steel and aluminum cut thinner. Capacity differs between plasma brands, so we confirm it for the source on your quotation. CNC parts usually start with a pierce, which is roughly half to two thirds of the edge-start thickness.
Typical work
Signage and lettering
Letters, logos and decorative panels in thin steel and aluminum.
Metal cabinets and enclosures
Panels, doors and brackets cut from 1–3 mm sheet.
HVAC ductwork
Flanges, fittings and duct parts from galvanized sheet.
Agricultural and machine parts
Plates, gussets and brackets up to 20 mm thick.
P1325 or a 1500 × 3000 mm table?
Choose the P1325 if you buy 1220 × 2440 mm (4 × 8 ft) sheet, have limited floor space or work mostly below 12 mm. If you buy 1500 × 3000 mm plate or cut thicker parts every day, the industrial plasma table or the P1530 with oxy-fuel avoids re-cutting sheets to fit.
What your workshop needs
- Electrical supply: 3-phase 380 V as standard, 220 V on request. Tell us your local voltage and frequency (50 or 60 Hz) before we build the machine.
- Clean, dry compressed air: an air compressor with a refrigerated dryer and filters. We give the flow and pressure for the plasma source you choose.
- A level concrete floor and space to load full sheets with a forklift or crane.
- Fume control: a water table or a down-draft table with an extraction fan, depending on the model.
- A Windows PC for nesting software such as FastCAM, to turn DXF drawings into cutting programs.
Shipping, installation and support
Free production layout
Send your parts list or shop drawing and our engineers suggest the machine size, plasma source and table layout before you order.
Packed for sea freight
Machines are packed for container shipping. We quote to your nearest port in South America, Africa or elsewhere and prepare the export documents.
Installation and training
Remote installation guidance and operator training are included. On-site commissioning can be arranged.
Remote diagnostics
Our team supports the control, the plasma source and the nesting software remotely, so most problems are solved without waiting for a visit.
Get a configuration and price
Send the material, the thickest plate or largest pipe you cut, your sheet or pipe size and how many hours a day the machine will run. An engineer replies with the right P1325 configuration, the options and a price delivered to your port.
Frequently asked questions
What is the working area of the P1325?
1300 × 2500 mm, which takes a full 4 × 8 ft (1220 × 2440 mm) sheet.
How thick can the P1325 cut?
From 0.5 mm up to 25 mm, depending on the plasma source fitted. A 45 A source suits thin sheet; for 20–25 mm plate choose a 100–120 A source.
Is automatic torch height control included?
Yes. Arc-voltage torch height control is standard and compensates for warped plate in real time.
Which control systems are available?
Starfire, Fangling or DSP. Starfire and Fangling run nested programs from FastCAM or StarCAM; DSP handheld control suits simple shapes.
Can it run on single-phase or 220 V power?
The standard supply is 3-phase 380 V, and a 220 V version is available. Tell us your voltage and whether your grid is 50 or 60 Hz.
Does it come with a water table?
A water table or an exhaust system is available as an option to control smoke and heat. Tell us which you prefer when you ask for a price.
Related machines and guides
Last updated 15 October 2026. Specifications are for standard configurations and can change with options; confirm on your quotation.